QSC CXD Serie Manual Del Usuario página 17

Step 4 — Save Wizard Preset
OUTPUTS
User Preset Number:
New Preset Name
C o n
Edit preset number or press EXIT
Create New Preset from an Existing Preset
To create a preset from an existing preset, recall the preset with the desired output configuration, modify the Input parameters, Output parameters,
then save the preset. In addition, you can save the preset as you are going thru the creation process.
Recall a Preset
A Preset includes the output configuration, input parameters, and loudspeaker profiles (DSP, load, and assignments). There are 20 factory presets
that can be recalled, but not overwritten. Factory presets F1: Config thru F9: Config contain output configurations only. Factory presets F10: thru F20:
contain the output configurations and basic DSP for the configurations. There are 50 user presets that can be recalled and overwritten.
HOME > PRESETS > PRESET RECALL > ENTER
Step 1 — Select Preset
F1: A B C D
F1: A B C D
M A M
Input Sub
Step 2 — Confirm Selection
F1: A B C D
F18: 3-Way
M
A+B
Press ENTER to confirm selection
SPEAKERS SAVE
21
f i g - A
SAVE
B M C M D
LF MF HF Full
M C M D
When you have finished
selecting loudspeakers,
To edit User Preset number, press
continue to scroll to
access the SAVE tab.
Indicates more Presets
To select the Preset con guration, press
The message at the bottom changes to: "Recalling Preset now... "
You may hear relays clicking
17
Scroll to the Save screen
Turn to adjust parameter
To confirm, press
Scroll to desired Preset
20 Factory, 50 User-defined
To con rm the selection, press
TD-000367-00-A
ENTER
ENTER
EN
ENTER
ENTER