QSC CXD Serie Manual Del Usuario página 25

Utilities
The Utilities section provides the following amplifier information and functionality:
HOME > UTILITIES > STATUS > ENTER
Check the Amplifier's Health
UTILITY - STATUS
Amp Total Run Time:
Hardware: V12
Firmware: V1.0.22
DC Status: OK
VRail 1: 148V
VRail 2: -150V
HOME > UTILITIES > AMP ID > ENTER
Name the Amplifier
UTILITY - AMP ID
Serial #: 123abc
Change Amp ID to:
m y
HOME > UTILITIES > PASSWORD > ENTER
Add or Change the Password
UTILITY - CHANGE PASSWORD
Current Password:
Q S C
M Y
The default password for all ampli ers is QSC – all uppercase.
The password can be up to 10 characters long, and contain, A — Z a — z 0 — 9 _
22:37:48 Hrs
Temperature:
CH1 & CH3: 27C
CH2 & CH3: 29C
Power Supply: 24C
Amp ID: my amp ID
a m p I D
CONFIRM
New Password:
p a s s w o r
CONFIRM
Amp Total Run Time:
HH:MM:SS
Hardware version
Firmware version
update thru Amplifier Navigator
DC Status:
VRail 1 = +147VDC +/- 5V typical
VRail 2 = -147VDC +/- 5V typical
Indicates editing
Scroll to desired letter position
Indicates "New
Turn to select desired character
Preset Name"
is selected
Up to 21 characters
A - Z / a - z / 0 - 9 /
_ / - / space
To enter "Current Password:", press
With the first letter position selected, press
Turn to select desired character
When you complete the current password,
the "New Password:" is automatically selected
Repeat the procedure for the "New Password:"
- space
25
Temperature (CXD 4.3 & 4.5)
Thermal Limiting starts at 69ºC
Thermal Shutdown at 80ºC
To edit "Change Amp ID to:", press
press
press
When you are finished, press
Scroll to CONFIRM
Press
press
Scroll to CONFIRM
Press
TD-000367-00-A
EN
ENTER
ENTER
ENTER
EXIT
ENTER
ENTER
ENTER
ENTER
ENTER