QSC CXD Serie Manual Del Usuario página 18

Set up the Inputs
NOTE!: Changes made to input levels are in real time.
HOME > INPUTS > INPUT SENS > ENTER
Step 1 — Select Input Sensitivity
F1: A B C D
Inputs > Input Sens
INPUT SENS
HOME > INPUTS > INPUT GAIN > ENTER
Step 2 — Set Input Gain
EN
F1: A B C D
Inputs > Input Gain
INPUT GAIN
Set up the Outputs
NOTE!: Changes made to outputs are in real time.
Mixer
The CXD amplifiers are equipped with an internal mixer that allows you to
adjust the signals from each input to each of the four outputs.
diagram of the Mixer for Output Channel A.
• The default setting for the Input Gain is 0.0 dB, and is set in the
INPUTS section.
• Each output channel has four inputs, each controlled by a Mixer Gain.
• The Input Gain and Mixer Gain are cumulative. For example, if you set the
Input Gain to +2.0 dB, and the Mixer Gain to -5.0 dB, the resulting output
is -3.0 dB
As a default one channel is mixed to each output: 1 - A, 2 - B, 3 - C, 4 - D, all
other input channels are set to -100. Adjusting an Input Gain changes that
channel's input to the mixers of all channels. Changing a Mixer Gain affects only
that input for the selected output channel.
TD-000367-00-A
Input
1
+14 dBu
Press ENTER to confirm
Input
1
-11.8 dB
Press ENTER to confirm
Figure 26 is a
18
Scroll to select (+14 or +4 dBu)
(The background turns to green.)
To confirm selection, press
To move to the next input, press
Repeat procedure for
remaining input channels.
Scroll to select (-100 thru 20 dB)
To confirm selection, press
To move to the next input, press
Repeat procedure for
remaining input channels.
INPUTS
Input 1
0.0 dB
Output Mixers
B
C
D
Input 2
-100 dB
0.0 dB
Output Mixers
B
C
D
Input 3
0.0 dB
-100 dB
Output Mixers
B
C
D
Input 4
0.0 dB
-100 dB
Output Mixers
B
C
D
— Figure 26 —
ENTER
SEL
(0.1 dB increments)
ENTER
SEL
OUTPUT
MIXER A
0.0 dB
Output
A