QSC CXD Serie Manual Del Usuario página 20

HOME > OUTPUTS > SPKR PROC > LOAD SPKR > ENTER
Step 1 — Load an Existing Loudspeaker for the Selected Output
ABOUT
Speaker:
Band:
Filter:
Crossover
EN
HOME > OUTPUTS > SPKR PROC > CROSSOVER > HIGH-PASS (
Step 1 — Set the Crossover High- and/or Low-pass filters
F1: A B C D
HPF
HOME > OUTPUTS > SPKR PROC > CROSSOVER > GAIN/POL > GAIN > ENTER
Step 2 — Set the Crossover Gain and Polarity
F1: A B C D
Gn/Pol
TD-000367-00-A
SPEAKERS LOAD
Output: A
WL2102 BiLFNS
2-Way LF
80 Hz
CONFIRM
Output
20 dB
-60 dB
Freq Type Slope
70.0 BWrth 24dB/oct
Output
20 dB
-60 dB
Gain Polarity
-5.5 dB POL +
Band and Filter
selections are
displayed and
constrained based
on the loudspeaker.
To Load the speaker profile to the selected output, press
LOW-PASS) > ENTER
OR
Freq: 20 - 20 kHz
A
Type:
• Butterworth
• Linkwitz-Riley,
• Bessel-Thomson
Slope:
6dB to 48dB/oct
depending on Type
A
+
Gain -100 to +20 dB
–
Polarity + or -
20
To edit Speaker, press
Scroll to select Speaker model
To confirm, press
Scroll to (Band, Filter)
To adjust, press
Adjust selected parameter
To confirm, press
Scroll to LOAD
Scroll to select (Freq, Type, Slope)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to select (Gain or Polarity)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
EXIT
ENTER
ENTER
EXIT