QSC CXD Serie Manual Del Usuario página 21

EQ
HOME > OUTPUTS > SPKR PROC > PEQ > BAND 1, 2, 3, 4,
The graph is a composite of all five bands. Each band has a full range of 20 Hz to 20 kHz.
Step 1 — Set the EQ
F1: A B C D
Band 1
Parametrc
Delay
HOME > OUTPUTS > SPKR PROC > DELAY > ENTER
Step 1 — Set the Output Delay Time
F1: A B C D
Outputs > Spkr Proc > Delay
DELAY TIME
Limiter
HOME > OUTPUTS > SPKR PROC > LIMITER > ENTER > ENTER
Step 1 — Set the Limiter Mode
F1: A B C D
Type
AUTO
Med
5 > ENTER
OR
Output
A
20 dB
-60 dB
Type Gain Freq BW
-35 dB 100 .01
Output
Delay:
A
14.0 ms
Bypass:
Bypassed
Press ENTER to confirm
Output
A
SpkrPwr SpkrImp
200W 8.0
Type: Bypass, Parametric, Low Shelf,
High Shelf (Default Bypass)
Gain: -40 to +20 dB (Default 0.00)
Freq: 20 to 20kHz (Band 1 Def 100 Hz)
(Band 2 Def 500 Hz)
(Band 3 Def 1 kHz)
(Band 4 Def 2.5 kHz)
(Band 5 Def 5 kHz)
BW: 0.01 to 3.00 Octive
(Default 1.00 Oct.)
0.0 ms to
50.00 ms
1.0 ms increments
Bypassed or
Enabled
Turn to select the mode for the Limiter
21
Scroll to select
(Type, Gain, Freq, BW)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to (Delay Time or Bypass)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
To edit the Limiter mode, press
AUTO ADV
To confirm setting, press
TD-000367-00-A
ENTER
ENTER
EXIT
EN
ENTER
ENTER
EXIT
ENTER
OFF
ENTER