Using The Auto Tare; Zero Memory (Memory Slots) - Gram K3 Serie Manual De Utilización

To activate the function, press the button, then press repeatedly the
button until the display shows Aut-t 0.
Set the right digit to "1" to activate the function. Use the
arrow to set
value.
Confirm with and exit with .

Using the Auto Tare

Make sure the display is showing "0" and there are no objects on the platform.
Place an empty container or box on the platform.
The scale will show the tare weight and automatically perform the Tare function.
The value "0" will appear and then the tare indicator will show on the display.
Place an object in the container. The scale will show the net value (object's
weight).
If the box and its content are taken away, the scale will void the tare and the
value "0" will appear.
You can perform the previous operation as many times as required. The scale
will determine the container automatically until the function is disabled.

Zero Memory (memory slots)

Certain applications use the zero value not only in temporary memory but
when permanently stored.
To enable the function, press the button, then press the button for about
5 seconds until the word "UNITS" appear. Press the button, "MEM 0" is going
to appear. Press and then press to set the right digit to the value of "1".
37