Individual Weight Counter - Gram K3 Serie Manual De Utilización

If you want to return to the individual counter function, and count pieces of
the same weight used earlier, press the
display shows the "PCS" symbol.

Individual weight counter

Set the display to individual counter mode ("PCS" symbol and stability
indicator should be on) and press the
Press the button three times. The "CLUPro" message will appear.
The digits to the right indicate there are 100 memory slots available (from
00 to 99).
Use the and
digit. The or
and buttons select the required memory slot value.
Then press the
The display will show the "CLUPro" message again. Press the
exit and return to counter mode.
buttons to select the required value of the flashing
arrows allow you to select the next digit. With the
button.
button several times until the
button.
button to
27