Warning Mode Selection; Selecting Warning Mode - Gram K3 Serie Manual De Utilización

6. Press the
7. Perform the same operation with the bottom increment. This value is
usually the same as the top increment. In some cases it can be different
and it must be specified.

Warning Mode selection

Warning mode must be set up for the limit function. The scale will notify you
if the weight is within the specified limits or not. It produces a beeping sound
as a warning. There are two settings for warning mode:
1. Warning when the weight is outside of the specified limits.
2. Warning when the weight is within the limits.
Use the
button to proceed.

Selecting Warning Mode

The unit can emit a warning by sounding a continuous or a single short
whistle. To configure the type of warning signal use the
arrows to select the desired value and then press the
30
button to proceed when ready.
and arrows to choose the desired value and press the
and
button to proceed.