example "ILU 01"). The last two digits indicate the memory slot number.
3. Once the position of the memory slot you wish to use is selected.
4. Press the
5. To modify it and enter the tare's weight value, use the
buttons to select the number required.
6. To move to a digit on the right, press the
use the
to the left, press
7. To exit, press the
8. If you need to memorise more tares, press
procedure above.
9. After confirming the last memorised tare value, the message "ILUPro"
will appear. Press the button
Using the TARE memory
Free the platform of any weight. In weighing mode, press the
more than a second. The "TLU XX" message appears. XX is the last memorised
tare slot. To access other memory positions, use the cursors
navigate the tare memory until locating the slot you wish to use.
button, it will appear as a number on the display.
and
buttons. If you need to modify any digits located
until the desired digit flickers, then change its value.
button and the tare weight will be memorised.
button. To modify the value,
again, and follow the
to exit and return to weighing mode.
and
button for
and
to
21