Scanner function
This device allows uploading an item code through a scanner with a RS232C
output, connected to the optional COM2 data input/output.
This is a simple function. Once the scanner is connected to the COM2 port
proceed to scan the bar code of the product. The scale will now memorise the
last 6 digits of the code.
The code will be printed automatically along with the weight on the same
printing line. To change it you can scan another code. The scale will always
memorise the last scanned code.
ADVANCED FUNCTIONS
To access the functions menu, press the
show the "PLU XX" message.
Activating the display's light
After following the instructions above press the
you see the bl-SET message.
Select one of the following options using the
On -
Off -
Auto - Automatic light.
34
Light always on.
Light always off.
It turns off after the stability indicator is on for 5 seconds.
button and the display will
button several times until
and
arrows.