Push-Button - Beta URBAN 125 Manual Del Usuario

1
5.1 Changing the unit of measurement
Only the symbols Km/h and mph will be
displayed, and the unit selected will be
shown fl ashing (with f=1Hz, Duty=50%)
(fi g. 16).
A short press of the button will cause the
selected unit to change while a long press
Fig. 16
permits switching to the next adjustment
or exiting the Set-up menu.

6. PUSH-BUTTON

The purpose of the button is to:
- allow for scrolling through the various
functions.
- reset the partial distance and maximum
speed values and enable the chronometer.
- access the Set-Up menu.
- adjust the clock.
Scrolling through the functions (i.e. the
passage from one function to the next) is
always permitted, regardless of the state
of motion or rest of the vehicle; simply
press the button briefl y (tmin = 1 sec.) and,
once released, the display will updated
with the new function.
The partial distance and the maximum
speed can be reset when the vehicle is
stopped or moving, as described in the
previous paragraphs.
Entry into the Set-Up menu, clock
adjustment and chronometer activation is
only allowed when the vehicle is stopped
and operated as described in chapters
2 and 6.
The button is active when the key switch
is set to the ON position.
GB
26