Chronometer (Lap) - Beta URBAN 125 Manual Del Usuario

1

2.4 Chronometer (LAP)

This function describes the operation/
display of the chronometer.
The information is displayed using digits
1-5 and the abbreviation LAP.
To access the chronometer menu, press
and hold down the button that corresponds
to the screen, as shown in fi gure 6, until
the chronometer appears (fi gures 7-8).
The time is displayed in the format mm:ss
if hours = 0 or in the format hh:mm if
hours > 0
If hours > 0, when LAP is operational,
the symbol - that separates the hours from
the minutes, is fl ashing; when LAP is not
operational, the symbol is continuous.
If hours = 0, when LAP is operational, the
"e" symbols that separate the minutes from
the minutes, are shown fl ashing; when LAP
is not operational they are continuous.
Start-up: the chronometer can be started
in two ways:
1) manually, by pressing the button briefl y
(< 2 sec);
2) automatically, if the speed becomes > 0.
GB
Fig. 6
Fig. 7
Fig. 8
18