Beta URBAN 125 Manual Del Usuario página 141

L
URBAN200
M
O
N
P
Replacing the front sprocket
A description of the procedure for replac-
ing the front chain sprocket is provided
for information purposes only. The opera-
tion should always be performed by an
authorized BETAMOTOR dealer.
• - Turn the wheel until it reaches the stop,
I
• Remove the three chain guard fi xing
URBAN125
• Remove the chain from the sprocket.
• Engage first gear and loosen the
• Replace the sprocket O.
M
• To reassemble, follow the same proce-
URBAN200
Note:
We recommend replacing the front
sprocket along with the whole drive unit.
URBAN125
O
61
while loosening the nuts I (on both sides)
and the chain adjusters L, so as to be
able to loosen the chain.
screws F (2 screws for URBAN125
models).
pinion-fi xing nut N anticlockwise for the
URBAN200, and the two clamps P for
the URBAN125.
dure in reverse order.
3
GB