Battery Charge Level; Clock - Beta URBAN 125 Manual Del Usuario

2.7 Battery charge level

The information is displayed using the
digital bar graph in the lower left part,
as shown in fi g. 11.
The bar graph, updated every 4 seconds,
is organised according to the following
table (tolerance ±0.1 V):
Voltage (Volt)
Until 9,99 Volt
From 10,00 V to 10,49 V
From 10,50 V to 10,99 V
From 11,00 V to 11,49 V
From 11,50 V to 11,99 V
From 12,00 V to 12,49 V
From 12,50 V to 12,99 V
Over 13,00 Volt

2.8 Clock

This function describes the correct opera-
tion/display of the current time function.
This function is always displayed in the
format, hh:mm, using digits 6-9 (fi g. 12).
The clock remains active even when the
microcontroller enters the low power
phase (sleep-mode).
The information is not stored in the memory.
Sequence displayed:
from 0:00 to 23:59 for mode
from 0:00 to 12:59 for mode
Am
from 1:00to 11:59 for mode
Pm
Fig. 11
Active segments
Fig. 12
Clock accuracy: ± 2.5 sec/day
0-24
0-12
Note: In the absence of mains
0-12 power, the TIME value is irretri-
evably lost.
21
1
2
3
4
5
6
7
8
1
GB