Replacing The Brake Pads - Beta URBAN 125 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5
A
B
D
GB

REPLACING THE BRAKE PADS

The procedure for replacing the brake
pads is provided only for information.
We recommend having the operation
performed by a BETAMOTOR authorized
workshop.
Front brake
B
To replace the front pads, proceed as
follows:
• Loosen the two screws A and remove
the brake caliper.
• U n s c r e w t h e t w o s c r e w s B .
Note: Screws B are secured very
tightly and should be loosened before
removing the caliper from the fork.
•Extract the brake pads.
•To refi t the parts, follow the reverse
procedure.
Ensure that the spring D shown in the
fi gure is properly seated by checking that
it offers some resistance to the insertion
of the brake pads.
To avoid braking problems, take special
care in ensuring that the screws are refi t-
ted properly.
Whenever the brake disc is removed,
apply Loctite to the screws when refi tting
C
Note: When removing the brake cali-
per, take care not to damage reed C,
as it is extremely fragile.
72

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Urban 200

Tabla de contenido