Ivoclar Vivadent Programat CS Manual De Instrucciones página 42

2.1.6
Contraindication
2.1.7
Contraindication
2.1.8
Contraindication
2.1.9
Contraindication
Never use the furnace without a
firing table.
Firing trays must not be placed in
the area surrounding the firing
table, since this will obstruct the
closing of the furnace head.
Foreign objects must not be
placed on the furnace head or the
air vents. Make sure that no
liquids or other foreign objects
enter the air vents, since this may
result in an electrical shock.
Make sure that no liquids or other
foreign objects enter the furnace.
2.1.11
Risks of burn hazard
2.1.12
2.1.13
2.1.14
Risks and dangers
The furnace must not be operated if the quartz tube in the
firing chamber is damaged. There is a risk of electric shock
upon contact with the heating wire.
10
Never place objects in the firing
chamber by hand, since there is a
burn hazard. Always use the tongs
(accessories) supplied for this pur-
pose. Never touch the hot surface
of the furnace head, as there is a
burn hazard. Please also refer to
the warnings on the furnace.
Risk of crushing and burn
hazard
Never reach under the furnace
head with the hand or other parts
of the body during operation,
since there is a risk of crushing
and a burn hazard.
Risks and dangers
This product contains ceramic
fibres and may release fibre dust.
Do not use compressed air, or
blow, on the furnace thus
distributing the dust in the
environment and observe the
additional notes on page 11.