Fein Slugger JME Holemaker III Serie Instrucciones De Uso página 13

OBJ_BUCH-0000000281-001.book Page 13 Tuesday, July 4, 2017 11:42 AM
Filling the coolant container.
Prevent the flow of liquid along the cable into the socket outlet or into the core
WARNING
drill unit, as this can lead to electric shock. Tie a bow in the cable near the plug,
so that any liquid can drip off.
Do not use the magnetic core drill unit when the cooling-lubricant system is defective. Each
time before operating, check for tightness against leaks and for cracks in the hoses. Prevent liq-
uids from entering or penetrating electrical components.
Filling the mounted coolant container
(figure 3)
Unscrew the cap from the coolant container.
Only use a coolant-lubricant emulsion (oil in
water) as the cooling agent.
Observe the manufacturer's instructions on
coolant.
Screw the cap onto the coolant container
again.
Fig. 3
Upper closing cap
2.
1. 3.
Coolant container
en
13