Troubleshooting - Leica RANGEMASTER CRF 1600 Manual Del Usaurio

TROUBLESHOOTING...

Problem
The image is not circular when
viewing.
Display not focused
When measuring the range, the a) Above or below measuring range
display shows
- - -
Display flashes or no
measurement is possible
Cause
a) The viewer's pupil is not located in
the eyepiece exit pupil.
b) The position of the eyecup
does not match that for correct use
with and without glasses.
Dioptric compensation not exact.
b) Object is not sufficiently reflective
Weak battery
33 33
Remedy
a) Correct the eye position.
b) Correct the adjustment: If wearing
glasses, push down the eyecup;
without glasses, it should remain
raised (see p. 24).
Repeat dioptric compensation
see p. 24).
Refer to measuring
range information (see p. 27)
Replace battery (see p. 22)