Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 114

TROUBLESHOOTING

Problem
The image is
not circular when viewing.
Display not focused
When measuring the range, the display
shows „
"
- - -
Display flashes or no measurement is
possible
Cause
a) The viewer's pupil is not located in
the eyepiece exit pupil.
b) The position of the eyepiece cup
does not match that for correct use
with and without glasses.
Diopter compensation not exact.
a) Above or below measuring range
b) Object is not sufficiently reflective
Battery dead
41
Remedy
a) Correct the eye position.
b) Correct the adjustment: If wearing
glasses, push down the eyepiece
cup; without glasses, it should
remain raised (see p. 28).
Repeat diopter compensation
(see p. 28)
Refer to measuring range
specifications (see p. 32)
Replace battery (see p. 26)

Publicidad

Tabla de contenido
loading

Tabla de contenido