Skin Touch" Waterfall; Vertical Hydromassage - Jacuzzi morphosis MEGA Uso Y Mantenimiento

"Skin Touch" waterfall

Adjust the water temperature as specified in the chapter "Use
of manual functions - Before starting..."
I Then set the dial to the indicated position.
I The water will flow down from the slot at the top; now sit
down and rest against back, and let the water run delicately
over the entire body.
The "Skin Touch" cascade lets you obtain a perfect relaxing ef-
fect, making the massaging action of the water gentler.
Remember to turn off the stop tap every time after use
(R). If temperatures above 38 °C have been selected,
it is advisable to turn back the thermostatic mixer knob
(M) to the position before the safety lock .

Vertical hydromassage

Adjust the water temperature as specified in the chapter "Use
of manual functions - Before starting..."
I Set the dial to "C" or "D" if you wish to use, respectively, the
upper or lower jets.
NOTE: if you wish, you can use all the jets at the same time:
just turn the dial to the position halfway between the symbols
(C) and (D); naturally, there will be a drop in water pressure
and a decrease in the power of individual jets.
I All four of the jets can be aimed independently, by press-
ing the nozzle in the desired direction. The form of the jet can
also be changed as you like, as shown; in this way, you will
obtain various types of massages, from energetic to soft.
22
Remember to turn off the stop
tap every time after use (R).
If temperatures above 38 °C
have been selected, it is ad-
visable to turn back the ther-
mostatic mixer knob (M) to
the position before the safe-
ty lock .