Use Of Electronic Functions Before Starting - Jacuzzi morphosis MEGA Uso Y Mantenimiento

Use of electronic functions - Before you start...
1 2 3
22.28
5
9
8
Before you use the electronic functions make sure that the main
switch installed up the line is on. See the chapter on electrical
safety in the installation manual.
I Each key of the control panel lets you activate a certain func-
tion and vary its parameters, if included; here is a brief de-
scription of the panel:
- 1: activation/adjustment of time
- 2: indication of best temperature for Turkish bath
- 3: activation/adjustment of date
- 4: display
- 5: variation of function parameters
4
- 6: activation of illumination system
- 7: alarm activation
5
- 8: activation of anti-scale cycle
- 9: activation of Turkish bath
6
7
When the shower box has power supplied to it, the display
shows the current time in a weak light (this is the standby
status).
I To activate the system, press any key:
- all of the LED's associated to the keys will come on (white light)
- the time is shown in blue light.
At this point, the system is ready to receive commands for the
activation of the various functions.
NOTE: this status lasts about 2 minutes, after which, if no key
is pressed, the system goes back to standby status.
23