Measurement Mode (Normal Operation) - MSA ALTAIR 5 Manual De Instrucciones

OPERATION
3.3.

Measurement Mode (Normal Operation)

The following options pages can be executed from the Normal Operation
screen (for further information see Section 7.5):
Peak Page
Min Page
STEL Page
TWA Page
Date Page
Last Cal Date
Cal Due
Motion Alert
Using the three instrument buttons, the user can navigate through each
sub-menu in a top/down sequence.
Refer to section 2.4 and 7.5 in the appendix for assistance on navigating
through these screens.
28
This page shows the peak readings for all
sensors.
This page shows the minimum reading for the
oxygen sensor.
This page shows the calculated STEL readings of
the instrument.
This page shows the calculated TWA readings of
the instrument.
This page shows the date.
This page shows the date of the last calibration. If
the instrument does not have a valid calibration, it
will display "LAST CAL INVALID".
This page shows the set date for the next
calibration
TM
This page allows the Motion Alert Feature to be
activated or deactivated.
ALTAIR 5 - Operating Manual
MSA
US