Measurement Mode (Normal Operation) - MSA ALTAIR 5X Manual De Uso

3.4

Measurement Mode (Normal Operation)

The following options pages can be executed from the Measurement screen:
BUMP page
Peak Page*
Min Page
STEL Page*
TWA Page*
Date Page
Last Cal Date
Cal Due*
Discoverable
Mode
Motion Alert
Wireless USB
* The display of these pages can be de-activated through MSA Link software
For further information see chapter 10.
This page allows user to perform a Bump Test on installed sensors
This page shows the peak readings for all sensors.
This page shows the minimum readings for the oxygen sensor.
This page shows the calculated STEL readings of the device.
This page shows the calculated TWA readings of the device.
This page shows actual date settings of the device.
This page shows the date of the last calibration.
This page shows the set date for the next calibration.
This page allows the user to put the instrument into Bluetooth discover-
able mode in order to pair with another device.
This page allows the Motion Alert Feature to be activated or deactivated.
This page allows the Wireless USB communication to be activated or
deactivated.
ALTAIR 5X/ALTAIR 5X IR
Operation
US
30