Operation
Passive Extension Operation via NO Pushbutton (see
Fig. 9)
The function effected via the NO pushbutton causes the
connected consumers to be switched on
- irrespective of the degree of brightness measured
- for approx. 80 seconds in the case of FM Sensors
6810-... and,
- in the case of FM Sensors 6800-..., for the time set on
the FM Sensor (at least 1 minute with time settings of
< 1 minute).
NOTES
-
Switching on and dimming are not possible via the
extension.
-
Repeated action when the lighting is switched on leads
to "retriggering" of the set time.
Active Extension Operation (Busch Watchdog
Insert 6805U-500 and FM Sensors
Since the master and the extension each have a separate
setting for the dusk value, the actual brightness condi-
GB
®
) via
38