Fitting; Fitting Mechanical Components - Festo DGCI Instrucciones De Utilizacion

DGCI-...
5

Fitting

Fitting mechanical components

Note
Incorrectly parametrized positioning drives can perform sudden unexpected
movements.
S Use the DGCI only with the specified mounting positions and parameters
( Drive-specific information on the controllers).
S Observe the mounting requirements and instructions specified especially in
the manuals for the controllers used.
S
Leave all screws and threaded bolts in their original states, unless you are
requested to modify them in these instructions.
S
Avoid the band system becoming
damaged or excessively dirty.
Damage to the band system can cause
leakage and reduce the efficiency of the
DGCI.
S
Make sure that the device is fitted free of
mechanical stress and distortion.
Festo DGCI-...-Z6 1207b English
Fig. 3
Fig. 4
29