Festo CMMO­ST-DION Serie Manual De Instrucciones página 22

CMMO­ST-...-DION/DIOP
Target group
This documentation is intended exclusively for technicians trained in control and automation techno­
logy, who have experience in installation, commissioning, programming and diagnostics of positioning
systems.
Service
Please consult your regional Festo contact if you have any technical problems.
Documentation
This document only describes the utilisation of the safety function STO – "Safe Torque Off" in accord­
ance with EN 61800-5-2, as implemented in the motor controller CMMO-ST-C5-1-DIOP/DION. The full
description of the motor controller includes the following documents:
Designation
Brief description
1)
CMMO-ST-...
Manual
GDCP-CMMO-ST-EA-SY-...
Help system for the FCT
2)
software
Description
GDCP-CMMO-ST-EA-S1-...
2)
Parameter lists
Special documentation
2)
CMMO-ST_SPUL
1) The documentation is enclosed in printed format.
2) The documentation can be found on the accompanying CD-ROM.
Tab. 1 Documentation on the CMMO-ST
22
Contents
Brief equipment and functional description of the motor controller for
initial information.
Equipment and functional description of the motor controller for all
2)
product variants:
– Mounting
– Commissioning via web server/Festo Configuration Tool (FCT)
– Communication via I/O interface
– Technical data
Descriptions of the Festo Configuration Tool (FCT) for commissioning
and parameterisation of:
– Configurable axis/motor combinations
– Positioning systems in Festo's Optimised Motion Series (OMS)
Use of the STO safety function ("Safe Torque Off").
2)
List with standard settings of the parameter files for positioning
systems in Festo's Optimised Motion Series (OMS).
Requirements for operating the product in the USA and Canada in
accordance with certification by Underwriters Laboratories Inc. (UL).
Festo – GDPC-CMMO­ST-EA-S1-Z6 – 1506c – English