Multi-Job Tray Mode - Kyocera DF-650B Guía De Uso

English
1
2
3
4
1-14

Multi-Job Tray Mode

The Multi-Job Tray Unit is an optional
device. Print or Copy output can be ejected
into a specified Multi-Job Tray.
This option is extremely useful when more
than one user is using the copier as a
printer. The printed documents for each
user will be ejected into the job tray
selected.
The following paper sizes can be used:
• Plain paper (80 g/m
• Recycled paper (80 g/m
• Colored paper (80 g/m
NOTE:
The maximum number of copies that can be stored in each job tray will
differ depending on the size of copy paper being used. For further information refer
to Multi-Job Tray Unit (option) on page 1-33.
Write the name of the user of each job tray
on the labels provided.
Attach the labels to the job trays, in the
location indicated on the illustration.
The trays to which labels should be applied
are 1, 2, 3, 4, and 5, as counted from the top
down.
Use the application in your computer to select a job tray between 1 and 5.
Select the paper size, page(s) to be printed and number of prints required.
DF-650(B), MT-1(B), BF-1(B), PH-4(A) AND PH-4(C) OPERATION GUIDE
2
): between A3 and B6R, or Folio, 11 x 17" and 8 1/2 x 11"
2
): A3, A4, A4R, 11 x 17", 11 x 8 1/2" and 8 1/2 x 11"
2
): A4, A4R, 8 1/2 x 11" and 11 x 8 1/2"