Kyocera DF-650B Guía De Uso página 9

English
NEVER attempt to repair or disassemble this product or its parts as there is a
danger of injury or fire or electrical shock.
If this product becomes excessively hot, smoke appears, there is an odd smell,
or any other abnormal situation arises, there is a danger of fire or electrical
shock. Immediately turn OFF the machine's main power switch, remove the
machine's power plug from its outlet and contact your service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into this product,
immediately turn the machine OFF at the main power switch, remove the
copier/printer power plug from its outlet and then contact your service
representative. If you continue to use this product without taking these steps,
there is a danger of fire or electrical shock.
ALWAYS contact your service representative for maintenance or repair of
internal parts.
CAUTION
For safety purposes, ALWAYS turn OFF the machine's main power switch
and remove the machine's power plug from its outlet when performing
cleaning operations on this product.
DO NOT touch the ejection tray when the product is in operation as there is a
danger of injury.
If dust accumulates within this product, there is a danger of fire or other
trouble. It is therefore recommended that you consult with your service
representative in regard to cleaning of internal parts. This is particularly
effective if accomplished prior to seasons of high humidity. Consult with your
service representative in regard to the cost of cleaning the internal parts of the
product as well.
Other Precautions
DO NOT place heavy objects on this product or cause other damage to the product.
When lifting or moving the product, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. They
could be damaged by static electricity.
DO NOT attempt to perform any operations not explained in this Operation Guide.
DF-650(B), MT-1(B), BF-1(B), PH-4(A) AND PH-4(C) OPERATION GUIDE 1-5