General Functions; Switching The Handset On And Off; Key Lock - Medion MD82144 Manual Del Usuario

General functions

Switching the handset on and off

You will have to remove the handset from the base station to switch it

off.
Hold the Receiver key pressed down for some seconds. 'Switch off?'

[Handset off?] will appear on the display.
Confirm with MENU. The display will go out.

To switch the handset back on, briefly press the call key. After a short

moment, the standard display appears on the display again.
You can also switch the handset back on by replacing it in the base
station.

Key lock

To prevent accidental dialling when you are carrying the handset with you,
you can activate the keypad lock. This is not possible during a call.
Hold the Rhombus key # pressed down, until the 'Keypad locked' entry

appears on the display.
When the keypad lock is activated, you can continue to use the
emergency services.
You can also continue receiving calls.
Hold the Rhombus key # pressed down again, until 'Keypad unlocked'

appears on the display, to switch off the key block again.
ES
EN
DE
29