Customer Service - Schlage L9000 Manual Del Usuario

2c Remove the outside cylinder.
Insert the key halfway into the cylinder and rotate cylinder
counterclockwise to remove.
Exterior
3
3a Remove the inside lever.
3b Remove the inside escutcheon.
Key inserted halfway
Interior
4
For indicator trim on outside of door, remove the inside
mounting plate and spring cage. Then, remove the ouside trim.
Interior
Mounting plate
Exterior
5
Check door preparation
IMPORTANT
• To install the indicator trim, additional door preparation
may be required. If additional door preparation is required,
remove the lock chassis from the door before drilling. Steps
for reassembly are included in this instruction sheet.
• Please refer to the template included in this package.
• Make sure the door is prepared with any necessary holes for
the indicator trim.
6
Complete installation of indicator trim
Go to STEP 4 ON PAGE 2 and follow the instructions to
complete the installation of the indicator trim.
1-877-671-7011
Spring cage

Customer Service

www.allegion.com/us