Customer Service - Schlage L9000 Serie Instrucciones De Instalación

INDICATOR LOCK RETROFIT INSTRUCTIONS
Indicator Retrofit Options:
Cylinder
Emergency
1
Remove armor front
2
Remove cylinder(s) or thumb turn if applicable
2a Loosen the cylinder mounting screw.
turn
Coin turn
Thumb turn
2b Remove the outside cylinder, if applicable.
Insert the key halfway into the cylinder and rotate
cylinder counterclockwise to remove.
2c Repeat for the inside cylinder, if applicable.
2d Remove inside or outside turns, if applicable.
3
Check door preparation
IMPORTANT
• To install the indicator trim, additional door preparation
may be required. If additional door preparation is required,
remove the lock chassis from the door before drilling. Steps
for reassembly are included in this instruction sheet.
• Please refer to the template included in this package.
• Make sure the door is prepared with any necessary holes for
the indicator trim.
4
Complete installation of indicator trim
Go to STEP 11 ON PAGE 4 and follow the instructions to
complete the installation of the indicator trim.
1-877-671-7011
Key inserted halfway

Customer Service

www.allegion.com/us