Using Optional Foot End Back Rest Pre−Op/Post−Op Head Extensions - Stryker Trio 1033 Operaciones Manuales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 124
USING OPTIONAL FOOT END BACK REST PRE−OP/POST−OP HEAD EXTENSIONS
C
BOTTOM VIEW
The Pre−Op/Post−Op Head Extensions are designed to be used only with the articulating head piece on the
optional Foot End Back Rest to provide additional litter surface and to protect the patient's head during trans-
port. The head extensions can be used as push handles when the Trio is being moved.
To insert the head extensions, pull the handle to retract the locking pin (B), insert the two pins (C) into the
receptacles on the Foot End Back Rest and release the handle so the locking pin clicks into place.
To remove the extensions from the litter, squeeze the handle (A) to retract the pin (B) on the side of the exten-
sion frame and pull the extension assembly straight out from the litter.
NOTE
Handle (A) only functions as a release lever for the head extension. It is not used for adjustment of the Foot
End Back Rest.
Operation Guide
B
A
1−17

Publicidad

Tabla de contenido
loading

Tabla de contenido