Eaton Powerware Serie Guia De Instalacion página 39

13. Install six cage or clip nuts as shown in Figure 20. If the rack holes
14. Slide the UPS into the rack. Verify that the rear mounting brackets
15. Secure the front of the cabinet to the rack as shown in Figure 20.
UPS
Optional
EBM
®
Eaton 9140 (9910-E82/E83) UPS Installation Guide for IBM
are square, use six cage nuts. If the rack holes are round, use six
clip nuts.
engage in and slide easily along the inside of the rails.
Figure 20. Securing the Front of the UPS
Position 17
Position 11
Position 8
Position 3 (M5 screw)
Position 2 (M5 screw)
S
®
Applications 164201715 Rev 2
www.eaton.com/ibm
INSTALLATION
(M6 screw
and cage/
clip nut)
23