Battery Charger; Operational Panel - DJI 2600W Guia Del Usuario

Overview

Battery Charger

1
2
3
4
1. Operation Panel
2. Charging Cables Clamp
3. Air Vent
4. Charging Cables Storage *
5. Handle
* The battery charger compatible with MG-12000P batteries does not have this storage space.
** The version compatible with T16/T20 batteries has an adapter at the end of the charging cable, while the
version compatible with MG-12000P batteries does not. The majority of the illustrations in this user guide
show the battery charger compatible with T16/T20 batteries.

Operational Panel

1. Charging Status LED × 4
Each LED indicates the charging status
of the battery connected to a charging
cable. The numbers (1-4) correspond to
the position of the charging cable on the
battery charger.
2. Warning Indicator
The warning indicator will be solid red if the
battery charger detects any abnormalities.
©
4 2019 DJI All Rights Reserved.
5
6
1 2
3
3. Mode Button
4. Power Button
6. Charging Cable **
7. Fan Cover
8. USB-C Port Cover
9. AC Power Port
10. GND Port
4
If this occurs, stop charging immediately.
Only start to charge again once the indicator
is no longer solid red.
Press to switch the charging mode. The
default charging mode is quick charge.
Press to turn the battery charger on and
off.
7
8
9
10