DJI 2600W Guia Del Usuario página 7

2. Connect the battery to the battery charger.
For the battery charger compatible with T16/T20 batteries:
a. When charging a T16/T20 battery, make sure the plug adapter is attached to the charging
cable before attaching it to the battery you wish to charge.
Before connecting the charging cable to the battery, make sure the plug adapter is
securely attached to the charging cable. Note: it is normal for there to be approximately 0.8
mm of the yellow part of the cable visible even when it is securely attached.
Make sure to place the charging battery on the same side that the charging cable is fixed
to the battery charger.
b. If users wish to charge MG-12000P batteries using the battery charger compatible with
T16/T20 batteries, first detach the plug adapter from the charging cable, then connect the
charging cable to the MG-12000P battery's charging and balancing port.
Although the battery charger compatible with T16/T20 batteries can be used to charge
MG-12000P batteries by removing the plug adapters, it is not recommended to charge
T16/T20 batteries and MG-12000P batteries at the same time. Doing so may negatively
affect the charging performance, or even damage the battery charger permanently.
Make sure to store plug adapters in a safe place for future use.
©
6 2019 DJI All Rights Reserved.