Publicidad
Idiomas disponibles
Idiomas disponibles
Demo:
with:
Test Signal
Type
Specs
Scope settings
Trigger
Modes
Purpose
a) Calibrate the oscilloscope so it displays the signals correctly (possible using the "Autoset" mode).
b) Perform the Full Trace and Full Screen commands in sequence in order to avoid superimposition of traces,
then assign the full screen to the display of traces.
Full Trace
c) Return to the initial Normal display and select the "XY mode" with CH1 on X and CH4 on Y, or CHA in X and
CHB in Y. A sequence of geometric forms will be displayed (heart; clover; rose; spiral).
Heart
20 - Chapter II
MTX3x5x SPO
OX 6000
& MTX105x SPO
OX 6000-II
no. 1 : Miscellaneous
4 pairs of successive signals about every 2 s
2.6 V < Vpp < 3.2 V - 10 Hz < F < 60 Hz
20 ms/div. - MAIN = 500 mV/div. - AUX = 500 mV/div.
standard on MAIN
XY (Display Menu) - neither "Min/max", nor "Repetitive Signal" (Horizontal
Menu)
Start in an entertaining way, demonstrating the following display modes:
Normal, Full Trace, Full Screen, XY
Normal mode
Clover
Rose
SCOPIX
HANDSCOPE
a) c)
Full Screen
Spiral
METRIX Oscilloscope Demo Kit
Publicidad
