Installing The Grass Bag - Briggs & Stratton Snapper Manual Del Operador

2. Install the side discharge deflector, making sure that
the hooks on top of the deflector are hooked behind the
mulching cover hinge.
3. Lower the mulching cover to secure the side discharge
deflector in place.
4. To remove: raise the mulching cover, remove the side
discharge deflector, and lower the mulching cover.
20
Installing the Mulching Plug
WARNING
Amputation Hazard
• DO NOT attempt any maintenance, adjustments or
service with engine and blade running.
• STOP engine and blade.
• Remove battery (if equipped).
Burn Hazard
• Engine and components are HOT.
• Avoid serious burns, allow sufficient time for all
components to cool.
1. Raise the rear discharge door. See Figure 21.
2. Install the mulching plug.
3. Lower the rear discharge door to secure the mulching
plug.
4. See Mulching Operation.
5. To remove: raise the rear discharge door, remove the
mulching plug, and lower the rear discharge door.
21

Installing the Grass Bag

WARNING
Amputation Hazard
• DO NOT attempt any maintenance, adjustments or
service with engine and blade running.
• STOP engine and blade.
• Remove battery (if equipped).
Burn Hazard
• Engine and components are HOT.
• Avoid serious burns, allow sufficient time for all
components to cool.
1. Raise the rear discharge door (A, Figure 22).
2. Remove the mulching plug, if installed.
3. Install the grass bag (B, Figure 22), making sure the
hooks on the bag (C) hook to the rear discharge door
hinge (D).
4. Lower the rear discharge door.
5. To remove: raise the rear discharge door, remove the
grass bag, and lower the rear discharge door.
15