Installing The Grass Bag - Briggs & Stratton Snapper 7800968-01 Manual Del Operador

12
Installing the Mulching Plug
(Optional Accessory on Some Models)
WARNING
Amputation Hazard
• DO NOT attempt any maintenance, adjustments or
service with engine and blade running.
• STOP engine and blade.
• Disconnect spark plug wire and secure away from spark
plug.
Burn Hazard
• Engine and components are HOT.
• Avoid serious burns, allow sufficient time for all
components to cool.
1. Install the mulching plug (A, Figure 13) if mulching is
desired after the bag adapter is installed. Install the
mulching plug completely and securely into the bag
adapter (B).
2. Install the grass bag as a safeguard and to further secure
the mulching plug.
WARNING
Thrown Objects Hazard
Install the grass bag when using the mulching plug. Failure
to do so may result in personal injury or death.
3. See Mulching Operation .
13

Installing the Grass Bag

(Optional Accessory on Some Models)
WARNING
Amputation Hazard
• DO NOT attempt any maintenance, adjustments or
service with engine and blade running.
• STOP engine and blade.
• Disconnect spark plug wire and secure away from spark
plug.
Burn Hazard
• Engine and components are HOT.
• Avoid serious burns, allow sufficient time for all
components to cool.
1. Install the grass bag adapter. See Installing the Grass
Bag Adapter .
2. Install the grass bag by sliding the connector (A, Figure
14) over the adapter flange.
3. Attach the grass bag hooks (B) over the middle handle
cross bar.
13