Working Instructions; Presetting The Speed - Parkside PSR 310 A1 Instrucciones De Utilización Y De Seguridad

Operation
Grinding tool
Sanding sleeve
Slatted grinding disc (60 mm)
Slatted grinding disc (10 mm)

Working instructions

The removal and the surface quality are essen-
tially determined by the choice of grinding tool,
the speed setting and the pressure applied.
Only grinding tools in good working order will
yield good grinding performance and be easy
on the power tool.
Only use original grinding accessories.
The specifications in the following table are recommended values:
Usage
Sanding back lacquer
Repairing lacquer
Removing lacquer
Softwood
Hardwood
Veneer
Aluminium
Steel
Removing rust from steel
Stainless steel
Stone
After working at slow speeds for extended pe-
riods you should allow the power tool to run at
36 GB
Surface shape
straight
flat
curved
uneven
fluted

Presetting the speed

Use the speed wheel
quired speed during operation.
The ideal belt speed varies by work piece or mate-
rial being worked. Always determine the respective
best speed yourself on a test piece. The following
table contains non-binding values to aid you with
selection.
Grit
(Rough grinding / finishing)
180 / 240
120 / 240
40 / 60
40 / 240
60 / 240
180 / 240
80 / 240
40 / 240
40 / 120
80 / 240
80 / 240
maximum speed in idle for approx. 3 minutes
to cool down.
Grit
medium 80
fine 120
extra fine 240
medium 80
fine 120
extra fine 240
medium 80
fine 120
to also preselect the re-
8
Speed setting
2 / 3
4 / 5
5
5 / 6
5 / 6
2–4
4 / 5
5
6
5
5 / 6