Stihl FSB-KM Manual De Instrucciones página 9

English / USA
Arrows on the deflector (as seen from
the underside) show the correct
direction of rotation of the cutting
attachment. When viewed from above,
however, the cutting attachment rotates
counterclockwise.
Adjust the hand grip and harness (if you
are wearing one) to suit your size before
starting work. The machine should be
properly balanced for proper control and
less fatigue in operation.
8
Starting
Start the engine at least 10 feet
(3 meters) from the fueling spot,
outdoors only.
Start and operate your trimmer without
assistance. For specific starting
instructions, see the appropriate section
of the instruction manual of the
KombiEngine. Place the power tool on
firm ground or other solid surface in an
open area. Maintain good balance and
secure footing.
!
Warning!
To reduce the risk of injury from blade or
line contact, be absolutely sure that the
cutting attachment is clear of you and all
other obstructions and objects, including
the ground, because when the engine
starts at starting-throttle, engine speed
will be fast enough for the clutch to
engage and move the cutting
attachment.
Once the engine has started,
immediately blip the throttle trigger,
which should release the starting throttle
and allow the engine to slow down to
idle.
With the engine running only at idle,
attach the power tool to the spring hook
of your harness if you are using one (see
appropriate chapter of the instruction
manual).
!
Warning!
Your power tool is a one-person
machine. Do not allow other persons in
the general work area, even when
starting.
!
Warning!
To reduce the risk of injury from loss of
control, do not attempt to "drop start"
your power tool.
FSB-KM