Installation And Connection; Fitting The Filter Container - Oase BioTec Premium 80000 EGC Instrucciones De Uso

4

Installation and connection

 B
Important: If the planned installation deviates significantly from the recommendations contained in this
manual:
► Have your specialist retailer check whether all technical specifications were adhered to. This is crucial
for a problem-free operation.
4.1

Fitting the filter container

W A R N I N G
Dangerous electrical voltage.
Possible consequences: Death or severe injuries caused by electric shock from electrical units
operated in or near water.
Protective measures for accessible ponds:
► Only use electrical units or installations with a rated voltage of U
► Electrical installations with a rated voltage of U
of at least 2 m from the water.
Protective measures for non-accessible ponds:
► Electrical installations with a rated voltage of U
of at least 2 m from the water.
C A U T I O N
Due to the high weight of the unit, spinal injuries or crushing of limbs is possible when carrying the unit.
The unit weighs more than 25 kg. (→ Technical data)
► Use suitable lifting equipment (e.g. special load handles).
► Have the aquarium and cabinet carried by several persons to spread the load and protect against
spinal injuries.
► Protect limbs from crushing.
► Do not transport the unit when it is filled.
N O T E
The filter system operates day and night and causes rinsing noises during the automatic cleaning
cycles. (→ Technical data)
► Please protect the general public and your neighbourhood from noise disturbance and comply with
the statutory noise regulations.
► Enclose the filter system such that the enclosure effectively absorbs the noises.
► Select the location of the filter system in order to avoid noise disturbance.
≤ 12 V or U
AC
> 12 V or U > 30 V must be located at a distance
AC DC
> 12 V or U > 30 V must be located at a distance
AC DC
- EN -
≤ 30 V in the water.
DC
45