Stihl FS 45 Manual De Instrucciones página 32

Ocultar thumbs Ver también para FS 45:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4
2
Assembling the mowing head
:
Fit the empty spool in the mowing
head.
:
If the spring (4) has popped out,
push it into the spool (2) until it
engages in position with an audible
click.
:
Mount the mowing head as
described in chapter "Mounting
Cutting Tools" / "Mounting the
Mowing Head" / "STIHL AutoCut C
5-2".
FS 45, FS 46
3
2
3
5
Winding Line onto Spool
:
Use nylon line with a diameter of
0.080" (2.0 mm) (green).
:
Cut two 6' 6" (2 m) lengths of line
from the replacement reel.**
:
Rotate the spool (2) counter-
clockwise until the two arrow points
are in alignment.
:
Push the straight end of each line
through one sleeve (5) in the
mowing head (3) until a noticeable
resistance – and then continue
pushing as far as stop.
** See "Special Accessories"
English / USA
:
Hold the mowing head steady.
:
Rotate the spool counterclockwise
until the shortest line is about
4" (10 cm) long.
:
If necessary, cut the longer line to a
length of about 4" (10 cm).
The mowing head is now full.
31

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fs 46

Tabla de contenido