Mounting The Deflector; Mounting Cutting Tools - Stihl FS 45 Manual De Instrucciones

Ocultar thumbs Ver también para FS 45:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Mounting the Deflector

2
1
4
:
Push the deflector (1) over the
clamp (2).
:
Insert nut (3) in the hex recess in the
deflector.
:
Make sure the holes line up.
:
Fit screw (4) and tighten it down
firmly.
FS 45, FS 46

Mounting Cutting Tools

3
Preparations
:
Lay your trimmer on its back with
the loop handle and shroud pointing
down and the output shaft facing up.
English / USA
1
3
2
4
Thrust Plate
The thrust plate is shipped with the
Polycut 6-3 and FixCut 5-2. It is only
required for these mowing heads.
AutoCut 5-2 mowing head
AutoCut C 5-2 mowing head
:
Pull the thrust plate (1) (if fitted) off
the shaft (2).
STIHL PolyCut 6-3 mowing head,
STIHL FixCut 5-2 mowing head
:
Slip the thrust plate (1) over the
shaft (2) and engage hexagon
recess (3) on external hexagon (4).
17

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fs 46

Tabla de contenido