Citizen E001 Información Técnica página 5

[2] Models with calendar (date and day of the week) display
* If your watch has a screw-type crown, lift up the crown to loosen it before operation. Be sure to
press the crown down firmly after operation.
[Date display models]
7
Setting the time
1. Pull the crown out to the time setting position when the second hand reaches the 0 seconds
position.
2. Turn the crown to set the time.
• The date changes at 12:00 AM. Pay attention to AM and PM when setting the time.
3. Securely push in the crown to the normal position in synchronization with a telephone or other
time service.
<Helpful hint for setting the time accurately>
After first stopping the second hand at the 0 seconds position, advance the minute hand 4-5 min-
utes past the correct time and then turn it back to the correct time. Then push in the crown in
synchronization with a telephone or other time service to accurately set the time.
Setting the calendar
1. Pull the crown out to the 1st click (calendar setting position).
2. Set the desired date by turning the crown counterclockwise.
3. Set the desired day of the week by turning the crown clockwise.
• In the case of date display models, turning the crown clockwise will result in the loose play
of the crown.
4. After you have set the calendar, be sure to press the crown back to its normal position.
• Do not adjust the calendar when the watch is reading as below. Otherwise the calendar
may not change correctly.
* Date display models ..... between 9:00 pm and 1:00 am
* Date, day of the week display models .... between 9:00 pm and 4:00 am
[Date, day of the week
Date
Normal position
Calendar setting
position
Crown
Time setting
position
Solar cell
3
display model]
7
SUN
Solar cell
Normal position
Calendar setting
position
Crown
Time setting
position
Date, day of the week