Technical Data; Fuel Requirements - Truper SOT-145G Instructivo

Technical Data

Description
Motor Rated Power
Motor
Fuel Tank
Fuel Consumption
Weight
Dimensions
Output
Voltage
Frequency
Maximum Starting Power
Maximum Operation Power
Sound Level
Work Cycle
Open Circuit Voltage
Current Adjustment Level
Protection Grade
Duty Cycle

Fuel Requirements

• The machine is built with an air-cooled 4-stroke motor
using pure unleaded gasoline.
• Never mix oil with the fuel.
• Never use fuels mixed with
WARNING
ethyl-alcohol (gasohol), ethanol, or methane. These fuels
attract humidity which causes separation and acid build
up while in storage. Acidity can damage the motor fuel
system when in storage.
• In order to not having issues with the motor, the fuel
system shall be emptied before storing the machine for
periods longer than 30 days or more. Drain the gasoline
tank, start the motor and leave it running until the fuel
lines and carburetor are empty.
Code
Fuel
One 120 V
30 min rest per tank consumed in continuous work in rated power.
SOT-145G
14358
Engine Driven Welder / Generator
14 Hp
439 cc 4-stroke
Gasoline
3.9 gal
0.99 gal/h
253.5 lb
27.5" x 22.8" x 28.7"
Generator
polarized double contact, One 240 V
120 V / 240 V
60 Hz
6 Hp
5.3 Hp
94 dB at 13 ft
Welder
75 V
40 A - 145 A
IP21S
35% | 3,5 min work per 6,5 min rest
The next season use fresh gasoline.
• Never pour inside the fuel container any motor or
carburetor cleaners. These can cause permanent damage.
Do not use the equipment in closed spaces.
DANGER
Prevent from breathing the accumulated
potentially mortal carbon monoxide gases It is an odorless
toxic gas.
Never smoke near fuel.
DANGER
Do not smoke near the filling-up
zone or when operating the equipment.
two-phase
3
ENGLISH