Fein KBM80U Manual Del Usaurio página 13

3 41 01 126 21 0.book Seite 13 Donnerstag, 21. Januar 2010 1:48 13
Assembly instructions.
Filling coolant tank.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Prevent the flow of liquid along the cable into the socket or into the core drill,
WARNING
as this can lead to electric shock. Tie a bow in the cable near the plug, so that
any liquid can drip off.
Only use cooling lubricant that is capable of being pumped.
Filling the mounted coolant tank (Fig. 4).
Pull off the upper closing cap of the
coolant tank.
Fill in pump-feedable cooling lubricant.
Do not use oil!
Mount the upper closing cap firmly
onto the coolant tank.
Fig. 4
Upper closing cap
Coolant container
en
13