Fein KBM80U Manual Del Usaurio página 6

3 41 01 126 21 0.book Seite 6 Donnerstag, 21. Januar 2010 1:48 13
en
6
– Arsenic, chromium and other wood pre-
servatives;
– Materials for pesticide treatment on boot
and ship hulls.
To minimise the unwanted intake of these
materials:
– Use dust extraction matched appropriately
for the developing dust.
– Use personal protective equipment, such as
a P2 filter-class dust protection mask.
– Provide for good ventilation of the work-
place.
The risk from inhaling dusts depends on the
frequency how often these materials are
worked. Materials containing asbestos may
only be worked by specialists.
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Sound emission
Measured A-weighted sound power level L
(re 1 pW), in decibels
Measuring uncertainty K
A-weighted emission pressure power level
measured at the workplace L
decibels
Measuring uncertainty K
Measured C-weighted peak sound pressure
level L , in decibels
pCpeak
Measuring uncertainty K
Vibrations
Weighted acceleration, in
2
m/s
2
ft/s
Measuring uncertainty K, in
2
m/s
2
ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy rep-
resents the upper limit of the values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance with the corresponding product standard.
Hot mixtures of sanding dust and paint/var-
nish remainders or other chemical materials
in the filter bag or the vac filter can self-ignite
under unfavourable conditions, such as spark-
ing from sanding metal, continuous sunlight
or high ambient temperatures. To prevent
this:
– Avoid overheating the material being
– Empty the dust collector/container in time.
– Observe the material manufacturer's work-
Observe the relevant regulations in your
country for the materials being worked.
wA
, in decibels
wA
(re 20 µPa), in
pA
, in decibels
pA
, in decibels
pCpeak
Wood and light-metal dust can
CAUTION
cause spontaneous combustion
or explosions.
sanded and the power tool.
ing instructions.
KBM80U
95
3
84
3
101
3
1.2
3.9
1.5
4.9
KBM80auto
95
3
84
3
101
3
1.2
3.9
1.5
4.9