Fitness Level Calculation - Kettler ST 2529-64 Instrucciones Informáticas Y De Formación

ST2529-64_Stroker_2995a-0612.de,en,fr,nl,es,it_ST2520-64 06.06.12 11:50 Seite 22
Training and Operating Instructions
Pulse value at
RECOVERY start
G
Fitness level
Pulse value after
RECOVERY end
(RECOVERY start -
RECOVERY end)
22
GB
Difference
RECOVERY – function
Measurement of recovery pulse rate
The electronics unit measures your pulse for 60 seconds
and calculates your fitness level.Press 'RECOVERY' on finis-
hing your training. Your current pulse value is saved (in the
image: '99').
After 60 seconds, your pulse value is saved again (in the
image: '60'). The difference between the values is then dis-
played (in the image: '39'). Your fitness level is then calcu-
lated (in the image: 'F 1.0'). The display finishes after 10
seconds.'RECOVERY' or 'RESET' interrupts this function.
If no pulse is measured at the start or the end of the time
countdown period, an error message appears.