Brother P-Touch 9200DX Guía De Referencia Rápida página 11

If the dialog box does not automatically appear,
double-click "My Computer" on the desktop, double-
click the icon for the CD-ROM drive containing the
CD-ROM, and then double-click "Ptsetup.exe" to
display the dialog box.
2 To install both P-touch Editor Version 3.1 and the serial
printer driver for the PT-9200DX, click the top button
(P-touch Editor).
To install just the serial printer driver for the PT-
9200DX, click the bottom button (Printer driver). (If just
the printer driver is to be installed, continue with the
installation from step 5.)
(1) P-touch Editor Version 3.1 installation
3 Install P-touch Editor Version 3.1 according to the
procedure described in P-touch Editor Version 3.1
Installation on pages 20 through 21.
4 After installation of P-touch Editor Version 3.1 is
finished, install the port monitor as described below.
The Port Selection dialog box appears, but nothing
needs to be selected yet.
(2) Serial port monitor installation
5 Click the Start button in the taskbar, select "Settings",
click "Control Panel", and then double-click "Print-
ers".
6 Select the "Server Properties" command in the "File"
menu.
8
7 Click the "Ports" tab, and then click the Add Port
button.
8 In the Printer Ports dialog box that appears, click the
New Port Type button.
9 In the Installing Print Monitor dialog box that appears,
click the Browse button.
0 In the Locate File dialog box that appears, specify the
file "d:\ptouch\driver\pt9200dx\win2000\monitor.inf"
(where "d:" is the name of the drive containing the P-
touch Editor CD-ROM), and then click the Open button.
A In the Installing Print Monitor dialog box, check that
the correct path appears in the "Copy files from" box,
and then click the OK button.