P-Touch Editor Version 3.1 Installation (For Windows® 95/98/Nt 4.0/2000) - Brother P-Touch 9200DX Guía De Referencia Rápida

P-touch Editor Version 3.1 Installation
(for Windows® 95/98/NT 4.0/2000)
. Before installing P-touch Editor Version 3.1, be sure to
read the serial port or USB port connection instructions
for your operating system.
Install P-touch Editor Version 3.1 as described below.
1 Insert the P-touch Editor CD-ROM into the computer's
CD-ROM drive. A dialog box that allows you to select
what to install automatically appears.
If the dialog box does not automatically appear,
double-click "My Computer" on the desktop, double-
click the icon for the CD-ROM drive containing the
CD-ROM, and then double-click "Ptsetup.exe" to
display the dialog box.
2 Click the top button (P-touch Editor).
3 In the dialog box that allows you to select the model,
click the icon for the PT-9200DX.
The InstallShield® Wizard for installing the P-touch
Editor software starts up, and then the Welcome dialog
box appears.
20
4 Carefully read the contents of the dialog box, and then
click the Next button to continue.
5 In the User Information dialog box, type the necessary
information into the appropriate boxes, and then click
the Next button.
If the information has already been registered in
Windows®, it will appear in the appropriate boxes.
6 A dialog box asking for confirmation on the entered
information appears. Click the Yes button to register
the entered information.
To change the information, click the No button, and
then change it.
7 In the Setup Type dialog box, select the installation
method, and then click the Next button.